This Bespoke Carpet to Carpet Floor Transition Strip is made from prime European Oak. A hidden channel runs the length of the strip to conceal the fixing screws. A choice of 6 accent strips is available, so you are sure to find one that will complement your decor, and once in place hides the fixings creating a seamless, elegant look.
These thresholds are handmade and hand sanded in Staffordshire by a local artisan. Once the profile is created they are oiled and waxed to give them a beautiful look and added protection.
Available in 2 sizes - 0.9m for a single threshold and 1.8m for a double threshold. These can be trimmed to size using a fine toothed saw.
- Blond Oak
- Honey Oak
- Dark Oak
The Blond Oak is a real wood insert to match the main section, other colours are a Vinyl insert. When trimming the Blond Oak insert it is best cut to length in the groove of the threshold strip for support. This can be done at the same time as cutting the threshold with a fine toothed saw.
Vinyl inserts can be scored with a utility knife and snapped to the required length. Vinyl inserts are 900mm long and therefore 2 will be abutted in a 1.8m threshold - a fine join may be slightly visible if not abutted with the factory cut ends together.
All inserts are pre double sided taped and to be peeled and stuck only after carpet fitting in case adjustment is needed
The 9mm height allows for carpet tucking and it is recommended that a distance of 8mm be allowed between the gripper and threshold.
Each strip has pre-drilled screw holes at 150mm centres to aid installation. In concrete floors use a 6mm masonry drill to an approximate depth of 35mm, before inserting a red plug. No drilling is required for wooden or chipboard floors.
Supplied with stainless steel screws and appropriate fixings as advised.
Professional installation is recommended or experienced and competent DIY enthusiast. As these thresholds are slightly wider than traditional metal thresholds, they can be retro fitted where carpets are already in place by a competent carpet fitter that can trim the carpet to take the slightly wider threshold.
Bespoke Carpet to Carpet Floor Transition Strip
- Width - 38mm
- Length - 0.9m or 1.8m
- Height - 9mm
Generally in stock and dispatched within 2 - 3 days.