This Bespoke Luxury Vinyl Tile to Ceramic Tile Floor Transition Strip is made from prime European Oak. A hidden channel runs the length of the strip to conceal the fixing screws. A choice of 6 accent strips is available, so you are sure to find one that will complement your decor, and once in place hides the fixings creating a seamless, elegant look.
These thresholds are handmade and hand sanded in Staffordshire by a local artisan. Once the profile is created they are oiled and waxed to give them a beautiful look and added protection.
Available in 2 sizes - 0.9m for a single threshold and 1.8m for a double threshold. These can be trimmed to size using a fine toothed saw.
- Blond Oak
- Honey Oak
- Dark Oak
The Blond Oak is a real wood insert to match the main section, other colours are a Vinyl insert. When trimming the Blond Oak insert it is best cut to length in the groove of the threshold strip for support. This can be done at the same time as cutting the threshold with a fine toothed saw.
Vinyl inserts can be scored with a utility knife and snapped to the required length. Vinyl inserts are 900mm long and therefore 2 will be abutted in a 1.8m threshold - a fine join may be slightly visible if not abutted with the factory cut ends together.
All inserts are pre double sided taped and to be peeled and stuck only after carpet fitting in case adjustment is needed
The 9mm height allows for carpet tucking and it is recommended that a distance of 8mm be allowed between the gripper and threshold. 6mm floor smoothing and 2-3mm LVT recommended and scribed to blank face. It can be pre-installed and smoothed up to the blank face as an alternative to smoothing to barrier foam, which saves time.
13mm height for tile side allowing for 10mm tile and 3mm tile adhesive. We recommend that any gap is sealed with clear silicone between underside of threshold and tile.
If installing on thin tiles (6-8mm) then the carpet to carpet threshold may be an alternative to eliminate any gap between tile and threshold
Each strip has pre-drilled screw holes at 150mm centres to aid installation. In concrete floors use a 6mm masonry drill to an approximate depth of 35mm, before inserting a red plug. No drilling is required for wooden or chipboard floors.
Supplied with stainless steel screws and appropriate fixings as advised.
Professional installation is recommended
Bespoke Luxury Vinyl Tile to Ceramic Tile Floor Transition Strip
- Width - 38mm
- Length - 0.9m or 1.8m
9mm - Luxury Vinyl Tile Side
13mm - Tile Side
Generally in stock and dispatched within 2 - 3 days.