These Codsall Lever Handles are a traditional design that will look beautiful in a wide range of period properties and even in more modern settings. They are available as a Latch or a Lock backplate, and the Lock backplate is also available for use with a Euro Cylinder.
Beautifully handcrafted in the West Midlands to create real quality furniture. The base metal is either solid brass or real bronze and is available in a range of natural finishes, hand applied finishes or plated finishes. See images below.
There is also a Bathroom Privacy version of this lever handle available, along with a Latch on a Shorter Backplate, please see separate listings.
For use with Mortice locks and latches and come Sprung as standard.
So, we recommend using a Standard or Light Sprung lock or latch, usually a 63mm or 76mm lock case is used to ensure the lever isn't positioned too far away from the edge of the door.
Sold as a Pair and supplied with matching fixings. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.
Codsall Lever Handles
- Back Plate Length- 152mm
- Back Plate Width- 41mm
- Handle Length- 115mm
- Projection to Rear of Handle - 38mm
- Projection to Front of Handle - 55mm
All measurements are approximate and should be used as a guide only, this is due to the handcrafted nature of the products.
Most of the finishes available are Made to Order with a lead time of approximately 4 - 6 weeks, please contact us if you would like us to check stock before you order.