Constable Elegance Lever on Latch Backplate

These Constable Elegance Lever on Latch Backplate are available with a choice of Ornate Lever design for a more traditional look or a Flatline Lever design to give a neat finish. Inspired by Victorian styling but will suit a wide range of period and contemporary homes.

2 Sizes of backplate available - 170mm and 210mm.

Lock and Bathroom Privacy Versions available - contact us for details and prices.

Made by the boutique British manufacturer, BrassArt, who has been making fine handcrafted brass furnishings since 1935. They use long established hand crafting techniques so that each of their pieces is truly stunning and of the highest quality. Each piece is cast, forged or machined from solid brass before being hand finished or electroplated.

We are pleased to offer the most popular finishes to order through our website, the full range of finishes can be seen below and if you would like to get pricing or order one of the other finishes available, please contact us.

For use with Mortice locks and latches and come Sprung as standard. We would recommend using at least a 75mm lock or latch as the oversized rose will sit too close to the edge of the door otherwise.

Sold as a Pair and supplied with matching fixings. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.

Constable Elegance Lever on Latch Backplate

Dimensions

170mm

• Lever Length - 108mm
• Backplate - 170 x 43mm

210mm

• Lever Length - 108mm
• Backplate - 210 x 52mm

Information on Finishes

Living Finishes - receive a protective wax coating prior to dispatch. Colour and texture variation is inherent in the creation of these hand finished patinas. Once installed the touch, time and environment will lead to gradual wear and oxidisation, thus imparting charm and elegance. Products finished with living finishes, by their very nature, may vary if ordered on separate occasions. High usage locations will speed up the ageing process. An occasional application of good quality beeswax can be applied if required.

Plated Finishes - these ‘electroplated’ finishes are used for both decorative and practical purposes. We apply a thin layer of metal to the substrate, in our case brass which ensures protection of the base metal and excellent resistance to corrosion and the elements.

All measurements are approximate and should be used as a guide only, this is due to the handcrafted nature of the products.

These products are generally Made to Order for each customer with a lead time of approximately 2 - 3 weeks, please contact us if you would like us to check stock before you order.