A simply styled Flush Ring Pull, available in 4 sizes, making suitable for a wide variety of uses around the home or office. Easy to operate, the ring is lifted when you insert your finger into the dimple, when it returns back down it sits flush.
Please take a look at the sizes available below, taking note of the overall depth to ensure you have enough space to accommodate the dimple. Fits to your door or drawer by way of 4 face Fix screws.
These pulls are supplied individually, so if you do require one on each side of the door please be sure to order two.
Beautifully handcrafted in the West Midlands to create real quality furniture. The base metal is either solid brass or real bronze and is available in a range of natural finishes, hand applied finishes or plated finishes. See images below.
Supplied with matching fixings. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.
Flush Ring Pull
- Height - 38mm
- Width - 29mm
- Total Depth - 10mm
- Height - 50mm
- Width - 38mm
- Total Depth - 12mm
- Height - 64mm
- Width - 50mm
- Total Depth - 17mm
- Height - 76mm
- Width - 57mm
- Total Depth -20mm
- All measurements are approximate and should be used as a guide only, this is due to the handcrafted nature of the products.
- Most of the finishes available are Made to Order with a lead time of approximately 4 - 6 weeks, please contact us if you would like us to check stock before you order.