Grace Lever Handle on a Covered Rose

This Grace Lever Handle on a Covered Rose is a lovely contemporary design.

Beautifully handcrafted by Croft, in the West Midlands. This quality furniture is made from either solid brass or real bronze and available in a wide range of finishes - see images at bottom of page.

The Covered Rose is available in 4 designs, Plain, Raised Edge, Reeded or Arc and gives a really sophisticated and neat finish.

Premium quality door, window and cabinet furniture, manufactured by Croft. We are pleased to offer the most popular finishes to buy through our website. Their full range of finishes can be seen below and if you would like to order one of the other finishes, please contact us.

For use with Mortice locks and latches and come Unsprung as standard.

So, we recommend using a Heavy Sprung lock or latch, usually a 63mm or 76mm lock case is used to ensure the lever isn't positioned too far away from the edge of the door.

Sold as a Pair and supplied with matching fixings. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.

Grace Lever Handle Dimensions

• Rose Diameter - 57mm
• Rose Thickness - 10mm
• Handle Length - 134mm
• Projection to Front of Handle - 63mm

Information on Finishes

Suitable for interior and exterior locations

• Polished Brass Unlacquered
• Satin Brass Unlacquered
• Aged Brass **
• Antique Brass **
• Imitation Bronze Unlacquered **
• Light Antique Brass **
• Matt Black Bronze **
• Satin Chrome
• Satin Nickel
• Polished Chrome
• Polished Nickel

** These Living Finishes receive a protective wax coating prior to dispatch. Normal wear and handling will allow the contact areas to reveal the metal below helping to create and aged effect. High usage locations will speed up the ageing process. An occasional application of good quality beeswax can be applied if required.

Suitable for interior locations and sheltered external locations only

• Zero Black ^

^ Zero Black is hand-finished and cured in an oven to provide increased durability and preservation. Simply clean with a soft cloth as required. Please avoid the use of cleaning solvents and abrasive products with this finish, as the application of chemicals can result in advanced deterioration of the lacquer.  Please be aware that the life of the lacquer can also be affected by environmental and atmospheric conditions.

All measurements are approximate and should be used as a guide only, this is due to the handcrafted nature of the products.

Most of the finishes available are Made to Order with a lead time of approximately 4 weeks, please contact us if you would like us to check stock before you order