A neat and sturdy Gravity Door Holder, that works as an Automatic Door Catch.
The Fixed Hook is attached to the wall or pillar and the Hinged Hook is attached to the back of the door or gate. When the door or gate is opened, the hinged hook lifts up and locates into the fixed hook automatically, holding the door or gate in place. To close it, simply lift up the hinged hook to release it.
Beautifully handcrafted in the West Midlands to create real quality furniture. The base metal is solid brass and is available in a range of natural finishes, hand applied finishes or plated finishes. See images below. Please note these are not available in Real Bronze finishes.
Supplied with matching fixings. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.
Gravity Door Holder
- Hinged Hook Fixing Plate - 76mm x 19mm
- Fixed Hook Fixing Plate - 50mm x 19mm
- Overall Span - 85mm
All measurements are approximate and should be used as a guide only, this is due to the handcrafted nature of the products.
Most of the finishes available are Made to Order with a lead time of approximately 4 - 6 weeks, please contact us if you would like us to check stock before you order.