These Paumelle Ball Race Lift Off Hinges are a solid brass hinge, and are designed for use with medium weight flush doors. The top half of the hinge lifts off making it easier to remove the door from the frame.
These Lift Off hinges are handed and must be specified to operate in either a clockwise closing or an anti-clockwise closing direction. The leaf with the pin in the upwards position must be fitted to the frame. Hinge operation is either clockwise closing or anti-clockwise closing and should be specified using the ISO 5 clockwise closing and ISO 6 anti-clockwise closing convention. Please see the diagram above and check carefully that you are ordering the correct handing for your door - the hinges are made to order and are non-returnable.
There are a range of finishes to choose from so you will be able to find one that matches or complements your door furniture beautifully. See thumbnails above for finish illustration. Please note all of our brass finishes are unlacquered.
If you would like to order one of Simonswerk finishes not available on our site, please contact us for pricing and to place your order.
There are a number of Finial Styles to choose from, at a supplement depending on finish starting from £22.30 - please contact us if you wish to order with finial.
These hinges are sold as a SINGLE HINGE (not in pairs) and we supply them with matching screws. Always make a small pilot drill hole and use a manual screw driver to avoid damaging screws and finish.
Simonswerk Paumelle Ball Race Lift Off Hinge Dimensions
The following weight guidelines are based on using 3 hinges per door, which is now considered the industry standard.
- Height – 127mm
- Width – 102mm
- Knuckle – 12.7mm
- Leaf Thickness – 3.5mm
- Load Max – 60kg
Simonswerk Hinges are generally Made to Order with a lead time of approximately 2 - 3 weeks, if your order is urgent please contact us.